User's Manual

BCM BPR1000-PU/BPR1000-U/MOR600-N
When connect the power adapter to back panel power Jack 。The power LED Will Turn ON
to indicate power has been applied.
C：Check WWAN LED
When Power ON the BPR1000, The BPR1000 Will Auto to detect and initial Your Date
Card。Then status LED Will Flash ON and OFF One by one as BPR1000 Performs initialization
and Internet connection process。BPR1000 Will Auto Configured properly for your Internet
Service Account。It Will take a few minutes。
When Complete, the status LED Will illuminate Green。Please refer the below Status
LED Activity table for each State。
LED Color Activity State
None None
No Data Card Inserted or No
Internet Connection
Green + Red Always On System Initialization State
Green Always On
High Speed Internet
Connection
Green Flash at Same Time
Low Speed Internet
Connection
Power LED
4 V 0.1