User`s manual

• Power Button Function

This feature sets the function of the power button. Settings are:

[Power Off] The power button functions as normal power off button.

[Suspend] When you press the power button, the computer enters the suspend/sleep mode, but

if the button is pressed for more than four seconds, the computer is turned off.

• Restore On AC Power Loss

This item specifies whether your system will reboot after a power failure or interrupt occurs. Settins are:

[Off] Always leaves the computer in the power off state.

[On] Always leaves the computer in the power on state.

[Last State] Restores the system to the status before power failure or interrupt occurred.

• Wakeup Event Setup

Press <Enter> and the following sub-menu appears:

• USB Device Wakeup From S3/S4

The item allows the activity of the USB device to wake up the system from S3/S4 state.