User`s manual

• I/O Devices Configuration

Press <Enter> to enter the sub-menu and the following screen appears:

• OnBoard Floppy Controller

Enable/ disable the onboard floppy controller.

• COM Port 1

Set the serial COM port #1 base address and IRQ.

• COM Port 1 Type

Set the COM port #1 in the mode of “RS232”, “RS422”, or “RS485”.

• IRDA Support

Enable/ disable the IrDA port.

• IR Duplex Mode

Select the “Full Duplex” or ”Half Duplex” for IR Duplex mode.

• COM Port 2

Set the base address for serial COM port #2.

• COM Port 2 IRQ

Set the IRQ for serial COM port #2.