User`s manual

• SATA Devices Configuration

Press <Enter> to enter the sub-menu and the following screen appears:

• SATA#1 Configuration

Set the SATA#1 ports (SATA1, SATA2, SATA3, and SATA4) in the mode of “Enhanced”,

“Compatible” or “Disable”.

• Disabled: Disabled the SATA devices.

• Compatible: Enable the SATA devices and releasethe IRQ14/15 for SATA devices.

• Enhanced: Select Enhanced if you want to use the SATA as IDE /RAID or AHCI function.

• Configure SATA#1 as

When this option is set to “Enhance”, the field is adjustable. It allows user to configure the SATA

devices as IDE/ AHCI or RAID.

• SATA#2 Configuration

When the option “Configure SATA#1” is set to “IDE”, the filed is adjustable. It allows you to enable/

disable the SATA#2 controller (SATA ports “SATA5”, and “SATA6”).