User`s manual

MX945GME
Mainboard
Memory
The mainboard provides one 240-pin non-ECC DDRII
533/667 DIMM slot and supports up to 2GB system
memory.
For more information on compatible components, please visit
http://www.bcmcom.com.
DDRII
240-pin, 1.8V
64x2=128 pin 56x2=112 pin
Single-Channel: All DIMMs in GREEN
Installing DDRII Modules
1. The memory module has only one notch on the
center and will only fit in the right orientation.
2. Insert the memory module vertically into the DIMM
slot. Then push it in until the golden finger on
the memory module is deeply inserted in the DIMM
slot.
Important
You can barely see the golden finger if the memory
module is properly inserted in the DIMM slot.
3. The plastic clip at each side of the DIMM slot
will automatically close.
Volt
Notch
2-6