Owner`s manual

1. Remove packaging caps from compressed air cylinder. To reach the trigger cable and air hose,

unzip the main storage compartment and fold back the Velcro flap inside.

2. With the compressed air cylinder outside of the backpack’s cylinder sleeve, connect the quick

connect fitting on the air hose

u by pulling the large ring toward the air cylinder v. It should click

back into place when air hose

w is properly connected. Coupler gauge x should fit in place to

ensure air hose is connected properly.

WRONG

SECURE

IMPORTANT! Screw the trigger cable nut y onto the trigger pin z. To expose the trigger

cable nut before threading it onto the trigger pin, it might be necessary to push the trigger handle

upwards.

4. Screw the trigger cover

{ over the trigger cable nut y.

TRIGGER CABLE NUT ATTACHED

TRIGGER COVER ATTACHED

Installing Compressed Air Cylinder