User`s manual

TS Series Time Stamp User’s Manual
Page 8
ADJUSTING PRINT IMPACT
Print impact may be set to any desired level, from very
hard to very light. The impact adjuster is located on
the bottom of the unit. Using a small flat head
screwdriver, turn the adjuster to the right to increase
or left to decrease the impact. (Figure 4)
Note: To extend the effective life-span of the unit, use
the lightest adjustment possible, which still gives a
legible imprint.
REPEAT/ADVANCE OPERATION
The Repeat/Advance switch (Figure 5), located on the back of the machine, allows you to
control the numbering feature of the unit. The Repeat/Advance switch provides the option of
numbering items consecutively, or with the same number. To utilize these options:
• To REPEAT an imprint with the same number, flip the
switch to the UP position.
• To ADVANCE the numbering wheels, press and hold
the switch and press the Manual Registration Button
to advance one number at a time. Continue pressing
until the desired number is reached.
• Return the switch to the CENTER position for normal
operations.
Figure 4
Figure 5