Operating instructions

RQT8152
8
Getting started
STEP 1 Connection
• You need to subscribe to a cable TV service to enjoy viewing their programming.
• Consult your service provider regarding appropriate cable TV box.
The connection will allow the video cassette recorder to be used for playback when this unit is turned off. For optimum operation, it is
recommended that this unit be connected as shown below.
Connection with a cable TV box/satellite receiver
RF
IN
VIDEO
AUDIO
R L S-VIDEO
OUT
RF
IN
VHF/UHF
RF IN
AUDIO IN
R L
VIDEO
IN
1
2
34
6
5
indicates included accessories.
indicates accessories not included.
To household
AC outlet
(AC 120V, 60 Hz)
Television
Red White Yellow
Audio/Video cable
Audio/Video
cable
75 Ω coaxial
cable
Cable from wall
or antenna signal
Red White Yellow
Red White Yellow
Red White Yellow
Cable TV box/
satellite receiver
AC power supply cord
Connect only after all other
connections are complete.
n Should I use the AUDIO/VIDEO OUT terminal
or the RF OUT terminal?
If your cable TV box has both AUDIO/VIDEO OUT terminals and
RF OUT terminals, we recommend connecting the AUDIO/
VIDEO OUT terminal with the unit’s IN1 terminal. Using this
connection provides better picture quality.
• The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
This unit
75 Ω coaxial
cable
If your television does not have
AUDIO/VIDEO terminals, an RF
modulator is necessary. Consult your
local dealer for more information.
75 Ω coaxial
cable
Cooling fan
Splitter
To IN 1
To enjoy higher picture quality
Connecting to the S VIDEO IN terminal
RF
IN
AUDIO IN
R L
VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
Audio/Video cable
S Video cable
This unit
S VIDEO OUT terminal
Connect to S VIDEO IN terminal on the television through an
S Video cable.
The S VIDEO OUT terminal achieves a more vivid picture than
the VIDEO OUT terminal. (Actual results depend on the
television.)
Red White Yellow
Red White Yellow
Television
Connecting to the COMPONENT VIDEO IN terminal
RF
IN
AUDIO IN
R L
VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
Television
Red White Yellow
Audio/Video cable
Red White Yellow
Component
Video
cable
This unit
COMPONENT VIDEO OUT terminal
Connect to COMPONENT VIDEO IN terminals on the television
through a component video cable. These terminals can be used
for either interlace or progressive output (Ô page 36) and provide
a purer picture than the S VIDEO OUT terminal.
• Connect to terminals of the same color.
DMR-ES20-P10_1.fm 8 ページ ２００５年８月３１日 水曜日 午前１１時４４分