Operating instructions

RQT8152
35
Reference
Specifications
Recording System: DVD Video Recording format (DVD-RAM),
DVD-Video format (DVD-R),
DVD-Video format (DVD-RW)
Optical pick-up: System with 1 lens
(662 nm wavelength for DVDs,
780 nm wavelength for CDs)
Recordable discs:
DVD-RAM :
Ver. 2.0
Ver. 2.1/3×–SPEED DVD-RAM Revision 1.0
Ver. 2.2/5×–SPEED DVD-RAM Revision 2.0
DVD-R :
for General Ver. 2.0
for General Ver. 2.0/4×–SPEED DVD-R Revision 1.0
for General Ver. 2.x/8×–SPEED DVD-R Revision 3.0
DVD-RW :
Ver. 1.1
Ver. 1.1/2×–SPEED DVD-RW Revision 1.0
Ver. 1.2/4×–SPEED DVD-RW Revision 2.0
+R :
Ver. 1.0
Ver. 1.1
Ver. 1.2
Recording Time:
Maximum 8 hours (using 4.7 GB disc)
XP: Approx. 60 minutes SP: Approx. 120 minutes
LP: Approx. 240 minutes EP: Approx. 360 minutes or 480 minutes
Regional Code: #1
Playable discs:
DVD-RAM, DVD-R, DVD-RW, +R,
+RW, DVD-VIDEO, Video CD, CD-Audio (CD-DA),
CD-R/CD-RW (MP3, JPEG, CD-DA, Video CD formatted discs)
Video system
TV system: NTSC color signal, 525 lines, 60 fields
Recording system: MPEG2 (Hybrid VBR)
Input: LINE (pin jack) ×2, 1.0 Vp-p; 75 Ω
S connector ×2 Y: 1.0 Vp-p; 75 Ω
C: 0.286 Vp-p; 75 Ω
Output: LINE (pin jack) ×1, 1.0 Vp-p; 75 Ω
S connector ×1 Y: 1.0 Vp-p; 75 Ω
C: 0.286 Vp-p; 75 Ω
Component video output (480p/480i): Y: 1.0 Vp-p; 75 Ω
P
B: 0.7 Vp-p; 75 Ω
P
R: 0.7 Vp-p; 75 Ω
Antenna reception input:TV Channel: 2 ch to 69 ch
CATV Channel: 1 ch to 125 ch
Audio system
Recording system: Dolby Digital (2ch)
Analog Input: LINE (pin jack) ×2
Reference input: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Input impedance: 47 kΩ
Analog Output: LINE (pin jack) ×1
Reference output: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Output impedance: 1 kΩ
(Load impedance: 10 kΩ)
Digital Output: Digital audio optical output connector
(PCM, Dolby Digital, DTS) ×1
Number of channels: Recording: 2 channels
Playback: 2 channels
DV Input: IEEE1394 Standard 4pin 1pc
Operating temperature range: 5 °C to 40 °C (41 °F to 104 °F)
Operating humidity range: 10 % to 80 % RH (no condensation)
Clock unit: Quartz-controlled 12-hour digital display
LASER Specification
Class 1 LASER Product
Wave Length:
662 nm wavelength for DVDs, 780 nm wavelength for CDs
Laser Power:
No hazardous radiation is emitted with the safety protection
Power source AC 120 V, 60 Hz
Power consumption: Approx. 22 W
Dimensions (W × H × D): Approx. 430 mm × 63 mm × 250 mm
(Approx. 16
15
/16″ × 2
1
/2″ × 9
27
/32″)
Mass: Approx. 2.55 kg (5.62 lbs)
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Power consumption in standby mode: approx. 15.7 W
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS 2.0 + Digital Out” are trademarks of Digital
Theater Systems, Inc.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
and 4,819,098, licensed for limited viewing uses only.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
DMR-ES20-P10_1.fm 35 ページ ２００５年８月３１日 水曜日 午前１１時４４分