Operating instructions

ManualsBrandsBC Time Recorder ManualsHousehold Appliancesoperating and programming inst

RQT8152

Transfer

(Dubbing)

Recording from a video cassette recorder

e.g.: Connecting other video equipment to the IN2 or DV input

terminals

• Turn off the unit and other video equipment before connecting.

If the audio output of the other equipment is monaural, connect to L/

MONO.

The S VIDEO terminal achieves a more vivid picture than the

VIDEO terminal.

When recording from the unit's DV terminal

Select the type of audio recording from “Select Audio Channel For

DV Input” in the SETUP menu (Ô page 33).

When recording from DV equipment (e.g., digital video camcorder),

you can record audio/video recordings from DV tape only.

Preparation

• Connect a video cassette recorder to this unit’s input terminals.

• Insert a disc you can use for recording.

Note

When recording using this unit’s input terminals, only the sound

received at the time of recording will be recorded.

As long as secondary audio that is recorded on the video cassette is

not output on the unit in play, it is not recorded.

1 While stopped

Press [INPUT SELECT] to select the

input channel for the equipment you

have connected.

e.g., If you have connected to IN2 input terminals, select “IN2”.

2 Press [REC MODE] to select the

recording mode.

3 Start play on the other equipment.

4 Press [* REC].

Recording starts.

To skip unwanted parts

Press [h] to pause recording. (Press again to restart recording.)

To stop recording

Press [g].

To record programmes to fill up the remaining space on the disc

Ô page 17, Flexible Recording

When the “DV AUTO RECORDING” function is used, programmes

are recorded as a title while at the same time chapters are created at

each break in the images automatically.

Preparation

1 Turn off the main unit and DV equipment, then connect the

equipment with the unit’s DV input terminal (Ô left).

2 Turn on the main unit and DV equipment.

3 Pause play of the DV equipment at the point you want recording

to start.

1 While stopped

Press [REC MODE] to select the

recording mode.

2 Press [FUNCTIONS].

3 Press [e, r] to select “Other

Functions” and Press [ENTER].

4 Press [e, r] to select “DV AUTO

RECORDING” and Press [ENTER].

5 Press [w, q] to select “Rec.” and

Press [ENTER].

Recording starts.

When recording finishes

The confirmation screen appears. Press [ENTER] to finish DV

automatic recording.

To stop recording

Press [g].

Note

• Only one piece of DV equipment (e.g., digital video camcorder) can

be connected to the unit via the DV input terminal.

• If you use video camcorders from other manufacture’s these are

not guaranteed to work.

•

It is not possible to operate the unit from the connected DV equipment.

• The DV input terminal on this unit is for use with DV equipment

only. (It cannot be connected to a computer, etc.)

• The DV equipment name may not be shown correctly.

• Depending on the DV equipment, the images or audio may not be

input properly.

• The date and time information on the tape of the DV equipment will

not be recorded.

• You cannot record and play simultaneously.

• When you are recording from a digital video camcorder, there

maybe some delay (approx. 1 second) after you start recording. To

ensure you record everything you want, start recording from a point

slightly earlier than expected starting point.

Manual recording

ADD/DLT

OPEN/CLOSE

SKIP SLOW/SEARCH

REC MODE ERASE

REC

F Rec

TIME SLIP

FUNCTIONSDIRECT NAVIGATOR

TOP MENU

RETURN

VOLUME

INPUT SELECT

STATUS

DISPLAY

SUB MENU

TV/VIDEO

SETUP

CREATE

CHAPTER

SCHEDULE

CM SKIP

AUDIO

CANCEL

VCR Plus+

e, r, w, q

ENTER

* REC

INPUT

SELECT

FUNCTIONS

REC

OPEN/CLOSE

Yellow White Red

S Video

cable

Audio/Video

cable