Operating instructions

RQT8152
15
Recording
Recording television programs
Preparation
• Turn on the television and select the appropriate video input to suit
the connections to this unit.
• Turn the unit on.
• It is not possible to record continuously from one side of a double
sided disc to the other. You will need to eject the disc and turn it
over.
• When using 8 cm (3″) DVD-RAM or 8 cm (3″) DVD-R with the
cartridge, remove the disc from the cartridge.
• You can record up to 99 titles on one disc ( 49 titles).
• It is not possible to record digital broadcasts that allow “One time
only recording” onto DVD-R, DVD-RW, +R or 8 cm (3″) DVD-RAM
discs. Use a CPRM compatible DVD-RAM.
1 Press [; OPEN/CLOSE] to open the
tray and insert a disc.
• Press the button again to close the tray.
2 Press [1 2 CH] to select the channel.
• Select the audio to be recorded (Ô page 16).
3 Press [REC MODE] to select the
recording mode (XP, SP, LP, or EP).
e.g., XP mode is selected.
4 Press [* REC] to start recording.
The elapsed time is shown on the display.
Recording will take place on free space on disc. Data will not
be overwritten.
• You cannot change the channel or recording mode during
recording. You can change them while recording is paused,
but the material is recorded as a separate title.
n To pause recording
Press [h].
Press again to restart recording.
You can also press [* REC] to restart.
(Recorded title is not split into separate titles.)
n To stop recording
Press [g].
From the start to the end of the recording is called one title.
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
n To show the remaining time (Ô page 25)
Press [STATUS] twice.
Note
Disc remaining time may slightly differ between different models.
REC
OPEN/CLOSE
IN2
CH
TV
ADD/DLT
OPEN/CLOSE
SKIP SLOW/SEARCH
REC MODE ERASE REC
POWER
F Rec
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
RETURN
VOLUME
CH
INPUT SELECT
STATUS
DISPLAY
SUB MENU
DVD POWER
TV/VIDEO
SETUP
CREATE
CHAPTER
SCHEDULE
CM SKIP
AUDIO
CANCEL
VCR Plus+
Numbered
buttons
F Rec
RETURN
e, r, w, q
ENTER
STATUS
TIME SLIP
1
4
3
DIRECT
NAVIGATOR
h
g
q
AUDIO
2
1
24
g
q
RAM
-R -RW(V) +R
+R
When recording to DVD-R, DVD-RW (DVD-Video format) or +R
• When recording MTS broadcasts
– If you do not connect a cable TV box
Select “Main” or “Secondary Audio Program (SAP)” in “Select
MTS” in the SETUP menu
(Ô page 33).
– If you connect a cable TV box
Select “Main” or “SAP” on the cable TV box.
• The aspect ratio of the recorded images will be 4:3.
• In order to play a DVD-R, DVD-RW (DVD-Video format) or +R
recorded using this unit on another playback source, the
disc must first be finalized (Ô page 31).
Insert label-up.
Insert with the
arrow facing in.
Insert fully so it clicks
into place.
To select with the numbered buttons:
Antenna Mode (Airwaves) CableTV Mode (Cable)
e.g., 5: [0] Ô [5] e.g., 5: [0] Ô [0] Ô [5]
15: [1] Ô [5] 15: [0] Ô [1] Ô [5]
115: [1] Ô [1] Ô [5]
TV
REC
P
TV
RECREC
P
Remaining time on the
disc
TV
REC
P
-R -RW(V) +R
0:57 XP12/24 6:34 PM
g
g
T12 0:02.34 XP
Remain
Remaining time
Elapsed time
Recording
mode
DMR-ES20-P10_1.fm 15 ページ ２００５年８月３１日 水曜日 午前１１時４４分