Specifications

Chapter 4 - 78 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
15-07-01: Programmable Function Keys
For one-touch access to the Call Forwarding Device setup code (713),
assign a function key (17) for Call Forwarding (Device).
For Off-Premise Call Forwarding by a Doorphone, assign a function key
(54) if required.
20-06-01: Class of Service for Extensions
Assign Class of Service (1-15) to an extension.
20-11-12: Class of Service Options (Hold/Transfer Service) - Call Forwarding
Off- Premise
In an extensions Class of Service, enable (1) or disable (0) setting up
Call Forwarding Off-Premise at the extension.
21-03-01: Trunk Group Routing for Trunks
Assigns the routes set in Program 14-06 for use with automatic external
call forward.
For each mode, assign the trunks used for call forward off-premise to
Route Table Number 1.
24-02-07: Forced Release Timer for Trunk to Trunk Transfer
All trunk to trunk transferred calls will be disconnected after this timer
has expired (default=30 minutes). Set this timer to 0 to prevent call cut
off. This applies to a manual trunk to trunk transfer call.
25-07-07: DISA Conversion Warning Tone Time
Determine the length of time a DISA/T2T/CFOP caller can talk before
the Long Conversation tone is heard (0-64800 seconds).
25-07-08: DISA Long Conversation Disconnect
This timer determines how long the system will wait before disconnect-
ing a call after the Long Conversation tone from Program 25-07-07 is
heard (0-64800 seconds)
32-01-03: Doorphone Timers - Off-Premise Call Forward by Doorphone Dis-
connect Timer
Define the conversation period for an Off-Premise Call Forward by Door-
phone call. When this timer expires, the caller will hear busy tone for 3
seconds (fixed timer) and the call will then be disconnected (0-64800).
• Operation
To activate Call Forwarding Off-Premise
1. Press SPK key (or lift handset) and dial 713.
-OR-
Press Call Forward (Device) key (PGM 15-07 or SC 851: 17).
2. Dial 6 + trunk access code:
0(ARS/Trunk Group Routing),
804 + Line Group (01- 25),
805 + Line number (e.g., 05 for line 5).
3. Dial the outside number to which your calls should be forwarded.
4. For System Phone only, press HOLD.
5. Press SPK (or hang up at SLT) to hang up.