Specifications

Chapter 3 - 36 Charts and Illustrations
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
Code: 71 + Ext. # or Dept. Group
(1-32)
Message Change for
Voice Attendant
Off=Message 1
On=Message 2
Flash Red =
Message 3
Code: 76 Toll Restriction in Credit
Code: *01 + Trunk
number (01-51)
Operation: Press key
Central Office Calls
Pressing a line key to
place or answer a trunk
call (where trunks are
01-51)
On green when
seized, on red when
in use (by other
party), Slow Flash
green when ringing,
Hold flash when on
Hold
Code: *02 + Trk group (1-9 or 01-
51)
Operation: Press key
Trunk Groups
Using a trunk group key
to access a Trunk
Group
On red when active
Code: *03 + ext. or department
group
Operation: Press key
Multiple Directory
Numbers/Call Coverage
Multiple Directory
Number: Placing or
answering a call from
your virtual (phantom)
extension or Call
Coverage: Placing or
answering a call to your
co-worker’s extension
Slow Flash red
when ringing, On
red when busy
Code: *04 + orbit (01-64)
Operation: Place or answer call +
Press key
Park
Placing a call into or
retrieving a call from a
Park Orbit
Fast Flash when
orbit is busy (green
at originator, red at
others)
Code: *05 + 0 (Incoming), 1
(Outgoing) or 2 (Both ways) + 00
(All trunk groups
incoming or ARS outgoing) or
Trunk group (01-25)
Operation: Press key
Loop Keys,
Trunk Group Routing
Placing or answering a
trunk call
Flash red when
ringing,
On green when in
use,
Flash green when
on hold
Table 3-2: Function Key Codes by Number
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and
enter the code.
Use this key... For this feature... When you are... Key Lamp Status