Specifications

Chapter 3 - 32 Charts and Illustrations
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
Code: 12
Operation: Press key 1/0 + Dest.
Ext.
Call Forwarding,
No Answer
Call Forwarding to
extension or Voice Mail
Slowly flashes red
Code: 13
Operation: Press key 1/0 + Dest.
Ext.
Call Forwarding,
Busy/No Answer
Call Forwarding to
extension or Voice Mail
Slowly flashes red
Code: 14
Operation: Press key 1/0 + Dest.
Ext.
Call Forwarding,
Dual Ring
Call Forwarding to
extension with both
phones ringing
Slowly flashes red
Code: 15
Operation: Press key 1/0 + Dest.
Ext. + Type
Call Forwarding,
Follow Me
Call Forwarding to
extension or Voice Mail
Slowly flashes red
Code: 16
Operation: Press key Condition +
Dest. Ext. + Type
Call Forwarding,
to Station
Call Forwarding to
extension or Voice Mail
Slowly flashes red
Code: 17
Operation: Press key + device
type code + requested data
(depends on device selected).
Call Forwarding,
to Device
Off-Premise
Selectable Display
Messaging
Voice Response System
(VRS)
(Park and Page)
Voice Response System
(VRS)
(Personal Greeting)
Setting up Call
Forwarding Off-
Premise, Selectable
Display Messaging,
VRS Park and Page
and VRS
Personal Greeting
Flashes red
Code: 19 + zone (1- 6)
Operation: Press key
Paging, External
Broadcasting to an
External Paging Zone
On red when
activated
Code: 20
Operation: Press key
Paging, External
Broadcasting to all
External Paging Zones
On red when
activated
Code: 21 + zone (1- 9 or 01-32)
Operation: Press Key
Paging, Internal
Broadcasting to an
Internal Paging Zone
On red when
activated
Code: 22
Operation: Press key
Paging, Internal
Broadcasting to all
Internal Paging Zone
On red when
activated
Code: 23
Operation: Press key
Meet Me Paging
Joining a Meet Me
Page
None
Code: 24
Operation: CALL + Press Key
Group Call Pickup
Answering a call ringing
another phone in your
Pickup Group
None
Table 3-2: Function Key Codes by Number
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and
enter the code.
Use this key... For this feature... When you are... Key Lamp Status