Specifications

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 381
Doc. No. 8846 - Release 2.0
April 2005
20-21-01: System Options for Long Conversation - Long Conversation Alarm
1
After a user places a trunk call, the system sends the first warning tone
to their extension after this interval (0-64800 seconds).
20-21-02: System Options for Long Conversation - Long Conversation Alarm
2
After hearing the first warning tone, the system sends additional warning
tones after this interval (0- 64800 seconds). The warning tones continue,
spaced by this interval, until the user hangs up.
21-01-03: System Options for Outgoing Calls - Trunk Interdigit Time (Exter-
nal)
Determine the length of time the system should wait before starting the
Warning Tone Timer.
25-07-07: System Timers for DID/DISA - DISA Conversation Warning Tone
Time
Determine the length of time the system should wait before the Warning
Tone is heard by DISA callers (0-64800 seconds). If an outside call is
transferred or forwarded off-premise using an outside trunk, this timer
starts immediately. This will occur if either trunk involved in the call is
programmed for the Warning Tone (Program 14-01-17).
25-07-08: System Timers for DID/DISA - DISA Long Conversation Disconnect
Determine how long after the Warning Tone is heard the system will wait
before disconnecting DISA calls.
Related Features
Central Office Calls, Answering
Warning Tone for Long Conversation does not occur for incoming trunk calls.
Central Office Calls, Placing / Toll Restriction
Warning Tone for Long Conversation occurs for all outgoing trunk calls, regard-
less of how they are placed or other outgoing restrictions.
Direct Inward System Access (DISA)
Warning Tone for Long Conversation can be enabled for DISA calls.
Intercom
Warning Tone for Long Conversation does not occur for Intercom calls.
Long Conversation Cutoff
Warning Tone for Long Conversation can be used with the Long Conversation
Cutoff feature for outgoing calls.
Single Line Telephones
Warning tones are not available to single line telephone (SLT) users.
•Operation
Warning Tone for Long Conversation is automatic if programmed.