Specifications

XEN Topaz NEC Business Solutions Ltd
System Hardware Manual Chapter 3 - 29
Doc. No. 8846 - Release 2.0 April 2005
Code: 20
Operation: Press key
Making an external All
Call page
On red when
activated
Paging, Internal
Code: 21 + zone
(1-9 or 01-32)
Operation: Press key
Broadcasting to an
Internal Paging Zone
On red when
activated
Code: 2
Operation: Press key
Broadcasting to all
Internal Paging zones
On red when
activated
Park
Code: *04 + orbit (1-9 or 01-
64)
Operation: Place or answer
call + Press key
Placing a call into or
retrieving a call from a
Park Orbit
Fast flash when orbit
is busy (green at
originator, red at
others)
Repeat Redial
Code: 29
Operation: Place call and
press key
Activating Repeat
Redial while on a call
Fast Flash while
system waits to
redial
Room Monitor
Code: 39
Operation: Press key at
destination & source + ext
Activating Room
Monitor
Dest. Fast Flash
red, Source Hold
Flash red
Save Number Dialled
Code: 30
Operation:
Save
: Place call + Press key
Redial
: Line or CALL +
Press key
Saving, redialling or
checking a saved
number
None
Secretary Call (Buzzer)
Code: 41 + sec. ext
Operation: Press key
Calling your secretary
(using the buzzer)
On red at source
Fast Flash red at
destination
Secretary Call Pickup
Code: 42 + boss ext
Operation: Press key
A secretary picking up a
call ringing your boss’s
extension
On red when
activated
Selectable Display Messaging
Code: 18
Operation: Press key +
additional data if needed
Setting up Call
Forwarding Off-
Premise, Selectable
Display Messaging,
VRS Park and Page
and VRS
Personal Greeting
Flashes red when
activated
Serial Call
Code: 43
Operation: Trk call + Hold +
ext + Press key
Placing a Serial Call to
a
co-worker
None
Step Call
Code: 36
Operation: Press key
Stepping through a
department group
None
Table 4: Function Key Codes by Features
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code.
For this feature... Use this key... When your are... Key Lamp Status