Specifications

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 361
Doc. No. 8846 - Release 2.0 April 2005
[TOPAZ]
Name=XEN TOPAZ
MaxDelayFirstDigit=3
MaxDelayNextDigit=1
MinExtSize=3
DefaultExtSize=3
Data1=***1I DIRECT
Data2=#I DIRECT
Data3=***2XXXF NOANSWER
Data4=***3XXXF NOANSWER
Data5=***4XXXF NOANSWER
Data6=***6XXXF NOANSWER
Data7=***5XXXF NOANSWER
Data8=***6XXX OPENING
Data9=***9 HANGUP
You may also require a new DEFAULT.SWS file for the Lingo to support the Topaz
system. Contact your NEC or Active Voice representative for details on how this may
be updated.
• Related Features
• Call Forwarding, Fixed
Fixed Call Forwarding can be used to transfer a user's unanswered calls to their
voice mail. Call Forwarding does not have to be programmed manually by every
user.
• Direct Inward Line
To have the Voice Mail Automated Attendant answer a trunk, program the trunk
as a DIL to a Voice Mail port.
• Message Waiting
Message Waiting functions normally with Voice Mail installed.
• One-Touch Calling
An extension can have a One-Touch Key for the Voice Mail Master Number.
• Programmable Function Keys
Function keys simplify calling the Voice Mail system.
• Ring Groups
Ring Group calls do not follow extension call forwarding to voice mail.
•Operation
CALLING YOUR MAILBOX
To call your mailbox:
With a system phone, your Message Center keys flash red when they have messages
waiting. If you don't have a Voice Mail key, your MW LED flashes instead.
System Phone
1. Press your Voice Mail key (PGM 15-07 or SC 851: 77).
OR
Press the CALL key and dial the Voice Mail Master Number.
Your mailbox number is normally the same as your extension number. You may
optionally dial a co-worker's mailbox - or use this procedure to call your mailbox from a
co-worker's phone.
OR
Press the CALL key and dial 717.