Specifications

XEN Topaz NEC Business Solutions Ltd
System Hardware Manual Chapter 3 - 27
Doc. No. 8846 - Release 2.0 April 2005
Department
Calling
Code: 46
Operation: Press Key
Logging in or logging
out of your Department
Calling Group
On when removed,
Off when installed
Department Step Calling
Code: 36
Operation: Dial busy ext +
Press key
Stepping through a
Department Group for
an idle member
None
Direct Station
Selection
Code: 01
Operation: Press key
Calling an extension
using a DSS key
Off = extension idle
On = extension busy
Flashing = DND
Do Not Disturb
Code: 03
Operation: Press key + code
(0-4)
Setting your phone in
DND
DND key on red
Do Not Disturb/Call Forward
Override
Code: 37
Operation: Press key
Calling an extension
which is in DND or Call
Forwarded
None
Group Call Pickup
Code: 24
Operation: CALL +
Press key
Answering a call ringing
another phone in your
Pickup Group
None
Code: 25
Operation: CALL +
Press key
Answering a call ringing
a phone in another
Pickup Group - if you
don’t know the group
number
None
Code: 26 + Pickup Group (1-
9 or 01-32)
Operation: CALL + Press
key + Pkup Group
Answering a call ringing
a phone in a specific
Pickup Group
None
Handset Mute
Code: 40
Operation: Press key
Muting the handset
transmission while on a
call
On when feature
active (no
transmission on
handset)
Hotline
Code: 01 + dest. ext
Operation: Press key
Placing a call to your
Hotline partner
Full BLF (red) for
covered ext.
Headset Operation
Code: 05
Operation: Press key
Enabling or disabling
Headset Operation
On red when
activated
Hold
Code: 44
Operation: Place or answer
call + Press key
Putting a call on
System Hold (if your
phone’s Hold key is
reassigned)
None
Code: 45
Operation: Place or answer
call + Press key
Putting a call on
Exclusive Hold
None
Table 4: Function Key Codes by Features
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code.
For this feature... Use this key... When your are... Key Lamp Status