Specifications

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 341
Doc. No. 8846 - Release 2.0 April 2005
22-05-01: Incoming trunk ring group assignment
Selects the ring group the trunk will ring on a per trunk per day/night
mode basis. To select the DSPDB Voice Mail voice mail enter 101.
24-02-02 :MOH or Ringback Tone on Transferred Calls
If the caller dials a digit during the automated attendant message and a
transferred has been initiated, specify whether they will hear either Ring
Back Tone (RBT) or Music On Hold (MOH), until the call is either
answered or terminated.
40-01-01: Voice mail basic setup - Voice channels
Number of channels of DSPDB from 0-16 dedicated to voice mail.
40-01-02: Voice mail basic setup - Time stamp
Defines whether messages are time stamped (1 = enabled, 0 = dis-
abled).
40-01-03: Voice mail basic setup - Conversation record for after transfer
Defines whether to continue conversation record after transfer (1 = yes,
0 = no).
40-01-04: Voice mail basic setup - Auto. attendant for non-existing exten-
sions
Defines whether mailboxes without a telephone automatically have auto
attendant set (0 = disable, 1 = enable).
40-01-05: Voice mail basic setup - Maintenance time
Defines the time that the voice mail performs self maintenance of
DSPDB compact flash daily. (00:00 - 23:59)
Note: the voice mail will close down whilst performing this action.
40-01-06: Voice mail basic setup - Automatic message erase
Defines the number of days a new message will remain in a mailbox
before it is auto erased : 0 - 180 days.
40-02-01: Mailbox setup - Mailbox number
This is the actual mailbox number up to 8 digits, if the mailbox is for an
extension it should match the extension number. Up to 300 mailboxes
can be assigned
40-02-02: Mailbox setup - Mailbox password
This defines the password for a particular mailbox. If using this com-
mand it is set at 4 digits if a password less than this length is required it
should be set by entering individual mailboxes. If no password is
required, leave blank.
40-02-03 :Mailbox Setup - Single Digit Dialling
Specify whether single digit dialling options shall be available during the
voice mail greeting message for each voice mailbox (0 = Disable, 1 =
Enable). This facility may also be enabled/disabled by the mailbox user
by dialling Voice Mail Service Code 68#.
40-03-01: Message recording setup - voice mail recording time
Sets the maximum recording time of answering service message record-
ing (1 to 10 minutes).