Specifications

Chapter 4 - 336 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
Default Setting
Trunk to Trunk transfer is disabled, Program 14-01-13.
Network Disconnect signal is disabled, Program 14-02-12.
Off Premise call forward is disabled, Program 20-11-12.
Trunk to Trunk disconnect timer is set to 1800 Seconds, Program 24-02-07.
DISA conversation (Trunk to Trunk conversation) timer is set to 45 Seconds, Program
25-07-07 & 08.
Route option for DISA class 1 is disabled, Program 20-14-02.
Trunk route for all trunk ports is set to 0 (None), Program 21-03-01.
Trunk to Trunk Transfer restriction is set to 'not restricted' for all classes of service,
Program 20-11-14.
• Programming
Disconnect timers for trunk to trunk calls.
Program 24-02-07, Trunk to Trunk disconnect timer, will disconnect all call types. The
default setting is 1800 Seconds (30 minutes).
Program 25-07- items 07 & 08, DISA disconnect timers, will disconnect calls routed
automatically by the Aspire. This includes calls forwarded off premise and trunks routed
directly off premise.
Trunk Routing for calls routed directly off premise.
Program 20-14-02 - An ISDN DDI routed directly off premise must have the Route
Option enabled for DISA Class 1.
Program 21-03-01 - An ISDN DDI routed directly off premise will need the trunk route
defining for each incoming ISDN trunk port.
Trunk to Trunk transfer restriction.
Program 20-11-14 - Must be set to 0 (Not restricted) to allow an extension to perform
Hold and Transfer of two trunk calls.
14-01-13 : Trunk to Trunk Transfer
14-02-12 : Network Disconnect Signal
20-11-12 : Off Premise Call Forward
20-11-14 : Trunk to Trunk Transfer Restriction
20-14-02 : Route Option for DISA
21-13-01 : Trunk Outgoing Route Access
24-02-07:Trunk to Trunk Disconnect Timer
25-07-07 & 08 : DISA Conversation Timer
• Related Features
•Hold
•Transfer
•Call Forward to Abbreviated Dial
•Call Forward Off Premise
•Trunk to Trunk Forwarding