Specifications

Chapter 4 - 330 Features

NEC Business Solutions Ltd XEN Topaz

Doc. No. 8846 - Release 2.0

April 2005

Pressing a line key

dialling a trunk access code

dialling a Trunk Group Routing code (0) - refer to the Trunk Group Routing

feature

• Direct Inward Dialling (DID)

All DID trunks of the same type should be placed in the same trunk group. These

trunk groups must then be assigned to a DID Translation Table.

• Loop Keys

Program a function key as a Loop Key to allow an extension user to answer

incoming trunks within a trunk group.

• Programmable Function Keys

Function keys simplify placing and answering trunk group calls.

• Ring Groups

Trunks ring extensions according to Ring Group programming.

• Trunk Group Routing

Trunk Group Routing sets outbound call routing options for users that dial the

Trunk Group Routing code (0) for trunk calls.

• Operation

To place a call over a trunk group:

1. At system phone, press a SPK key.

At single line telephone, lift handset.

2. Dial 804.

3. Dial trunk group number (1-9 or 01-25 ).

4. Dial number.

1. Press trunk group key (PGM 15-07 or SC 852: *02 + group)

2. Dial number.

To answer an incoming trunk group call:

1. Lift handset.

2. Press flashing trunk group key.