Specifications

Chapter 4 - 316 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
For the Toll Restriction Class you select, enable (1) or disable (0) Inter-
com Call Restriction. If enabled, extensions cannot place or receive
Intercom calls.
21-05-12: Toll Restriction Class - PBX Call Restriction
For the Toll Restriction Class you select, enable (1) or disable (0) PBX
Call Restriction. Refer to the PBX Compatibility Feature.
21-06-01: Toll Restriction Table Data Setup - International Call Restrict Table
Enter the international dialling codes you want to restrict.
21-06-02: Toll Restriction Table Data Setup - International Call Permit Table
Enter the international dialling codes you want to permit.
21-06-03: Toll Restriction Table Data Setup - Maximum Number of Digits
Table Assignment
Select the maximum number of digits allowed in outgoing calls for each
table (4-30).
21-06-04: Toll Restriction Table Data Setup - Common Permit Code Table
Program codes into the Common Permit Code Table.
21-06-05: Toll Restriction Table Data Setup - Common Restrict Table
Program codes into the Common Restrict Code Table.
21-06-06: Toll Restriction Table Data Setup - Permit Code Table
Program codes into the Permit Code Tables.
21-06-07: Toll Restriction Table Data Setup - Restrict Code Table
Program codes into the Restrict Code Tables.
21-06-08: Toll Restriction Table Data Setup - PBX Access Codes
The system allows up to 4 tables for PBX access codes. Refer to the
PBX Compatibility feature for the specifics.
• Related Features
• Central Office Calls, Placing
The system will allow or deny outgoing access to trunks depending on Toll
Restriction.
• Direct Inward System Access (DISA)
When using DISA, additional programming is required for Toll Restriction (DISA,
see Program 25-10).
• Toll Restriction, Dial Block
A user can temporarily block their extension’s Toll Restriction access, preventing
unwanted calls from being placed on their phone while they are away from their
desk.
• Toll Restriction Override
A user can temporarily override an extension’s Toll Restriction.
• Operation
To place a trunk call if your system is Toll Restricted:
1. Place call normally.
If your Toll Restriction Class does not allow the number you dial, your call will be cut off.