Specifications

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 263
Doc. No. 8846 - Release 2.0 April 2005
Enter 1 if lifting the handset should answer ringing Prime Line; enter 0 to
seize idle line appearance.
15-06-01: Trunk Access Map for Extensions
Set assignment so extension(s) can have access to Prime Line. Deny
outbound access to extensions that should not have Prime Line.
21-02-01: Trunk Group Routing for Extensions
Assign extension(s) to a Prime Line route (1-25) for outgoing Prime Line
access.
22-01-01: System Options for Incoming Calls - Incoming Call Priority
Set incoming Prime Line preference. Enter 1 to answer ringing Prime
Line; enter 0 to answer ringing Intercom call.
22-04-01: Incoming Extension Ring Group Assignment
Assign extension(s) to a ring group (1-25) that consists of the Prime
Line.
22-05-01: Incoming Trunk Ring Group Assignment
Assign a Prime Line trunk to its own ring group (1-25).
• Related Features
• Central Office Calls, Placing
Other programmed options for outgoing calls also affect a Prime Line.
• Direct Inward Lines/Direct Inward System Access
DILs and DISA calls also ring extensions directly, even if not allowed in ring group
programming.
• Line Preference
Prime Line Selection directly interacts with Line Preference.
• Voice Mail
If the DSPDB Voice Mail is installed, calls can be directed to the Voice Mail Auto
Attendant ring group (101).
•Operation
To place a call on your Prime Line:
1. Lift handset.
You hear dial tone on your Prime Line.
To answer a call on your Prime Line:
1. Lift handset.
Depending on your Line Preference programming, you’ll either answer the Prime Line or get dial tone on
the idle line appearance.