Specifications

XEN Topaz NEC Business Solutions Ltd
System Hardware Manual Chapter 3 - 13
Doc. No. 8846 - Release 2.0 April 2005
840
System alarm message
delete
--
842
Setting Call Forward (Both
Ring)
Call Forwarding 14
843 Setting Call Forward (Busy) Call Forwarding 11
844
Setting Call Forward (Busy/
No Answer)
Call Forwarding 13
845
Setting Call Forward (No
Answer)
Call Forwarding 12
846
Setting Call Forward (Follow
Me)
Call Forwarding 15
848
Setting Call Forward
(Immediate)
Call Forwarding 10
847 +
0 (Cancel)
1 (Trunk calls)
2 (Paging, ICM, Call Forward and
transfers)
3 (All calls)
4 (Call Forwards)
Activating Do Not Disturb Do Not Disturb -
849
Placing a call on Exclusive
Hold at a SLT set.
Hold -
850
Camping On to an extension
when calling into the system
through the VRS
Voice Response
System (VRS)
35
851 + key + code
Changing the function of a
programmable key using 851
service codes
Programmable
Function Keys
-
852 + key + code
Changing the function of a
programmable key using 852
service codes
One-Touch Serial
Operation
-
853 + bin + number + HOLD +
Name + HOLD to store
Storing Common Abbreviated
Dialling numbers
Abbreviated Dialling -
854 + bin + number + HOLD +
Name + HOLD to store
Storing Group Abbreviated
Dialling numbers
Abbreviated Dialling -
855 + One Touch key + code
Programming a One-Touch
Key or Personal Speed Dial
One-Touch Dialling -
856
Answering a call ringing a
phone in your pickup group
(except Ring Group calls)
Group Call Pickup -
Table 2: Service Codes by Number
Dial this Service Code…
1
When you are... For this feature...
Also see
Function Key...
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle CALL key first).