User manual

30
ECG PERFORMANCE TEST: (NIBP-1020 & NIBP-1030)
The ECG output is selected by pressing until the ECG Waveforms menu is
displayed. The key is used to choose the desired ECG output. There are 16
fixed waveforms available.
NOTE: While in this mode the NIBP simulation is disabled, but the IBP simulation is active
(NIBP-1030 only).
The display will resemble the following example:
LIST OF AVAILABLE
OUTPUTS
NSR 30 Bpm
NSR 60 Bpm
NSR 120 Bpm
NSR 240 Bpm
Sine Wave 10 Hz
Sine Wave 60 Hz
Sine Wave 100 Hz
Square Wave 0.125 Hz
Square Wave 2 Hz
Triangle Wave 2 Hz
PVC Arrhythmia*
Pair of PVC’s*
Run of 5 PVC’s*
Ventricular Tachycardia*
Ventricular Fibrillation*
Asystole*
*NIBP-1030 Only
SELECTED
OUTPUT