User manual

Connecting Pressure Cuffs

The NIBP-1010, NIBP-1020 and NIBP-1030 Blood Pressure Simulators are connected

between the blood pressure cuff and the DUT (Patient Monitor). The blood pressure cuff

should be disconnected from the DUT and a ‘T’ adapter inserted between the cuff and the

DUT. The NIBP simulator is then connected to the open side of the ‘T’ adapter as pictured

below:

NOTE: Roll the cuff tightly on itself or around a mandrel.

Connecting Patient Leads

For models with ECG output, snaps or patient lead test posts (NIBP-1030-BE only) are

provided along the sides and are identified by the markings on the overlay.

Blood

Pressure

Cuff

DUT

NIBP-

10xx

CONNECTIONS