Installation guide

TX1000 manual V7 June 09

Patrol settings

There are two preset patrols that can be started by the TX1000.

To activate: Press and hold the Patrol key and either Key 1 or Key 2. All other keys are ignored. Their

function is to enable a string of presets to be selected in turn, switching between presets after a fixed period

of time (default 30 seconds).

These patrols can be stopped at any time by pressing any of the four arrows on the Pan and Tilt control or

moving the joystick, when the receiver on which patrol is running is selected.

To Programme a Patrol

There is no separate patrol-programming function with the BBV TX1000 keypad. Once a preset has been

programmed, it is automatically included in Patrols 1 and 2.

To Remove a Preset from a Patrol

1. Select the receiver on which the patrol is to run.

2. Press Program to gain access to the menu, then press 5 to remove a preset from Patrol 1 or 6 to

remove from Patrol 2, followed by the preset number to be removed.

To Remove a Preset from Patrol 1:

PROGRAM

Option

Then

Preset number

To Remove a Preset from Patrol 2:

PROGRAM

Option

Then

Preset number

To Programme a Time Period for a Patrol

First, determine the time delay required from the table below:

Key Number Time delay (seconds) Key Number Time delay (seconds)

1 Random 0 to 100 seconds 9 96

2 12 10 108

3 24 11 120

4 36 12 132

5 48 13 144

6 60 14 156

7 72 15 168

8 84 16 180