User`s guide

Flash 2 - 11
Everyday Features
2
Note
DND Override privileges are granted by the system
administrator.
)ODVK
The FLASH is used to signal the Plexus system to put a call on
consult hold while you access a feature, usually using a two-
digit code. This is useful for call completion features (e.g. Call
Park and Page) and other conference calls.
Any instructions that require FLASH mean that you quickly
press and release the switchhook or the FLASH button. This
action should take no more than one second.
Note
If the switchhook is pressed for more than one second, it
will result in a hang up.
Some single line telephones have a FLASH button. Test this
button to verify that it’s compatible with the Plexus system. If
it is not, you must use the switchhook.
To access a feature code using FLASH:
1
With a call on the phone, press FLASH.
2
When you hear a dial tone enter
∗ + nn (feature code).
3 Follow the instructions for using that feature code.
SLT.book Page 11 Friday, September 10, 1999 2:57 PM