User`s guide

Setting Up Voice Mail 1 - 7
Getting Started
1
4
Enter your password, if applicable.
From a Remote Site
To check your messages from a remote site:
1
Dial the phone number at your office, which is typically the
office main phone number, where the Auto Attendant
answers.
Note
This feature is enabled only if the Plexus Voice Mail Auto
Attendant answers incoming calls. Please check with the
office manager to obtain this number. If the Voice Mail Auto
Attendant is not activated, ask the operator to transfer you
to Voice Mail.
2
Press
∗ + User ID.
3
Enter your password, if applicable.
SLT.book Page 7 Friday, September 10, 1999 2:57 PM