Installation guide

77
3. Assign the Disallow Table(s) to this extension.
Enter the 1-digit code from the above table:
Code Table Assigned
0 None
1 Disallow Table #1
2 Disallow Table #2
3 Disallow Table #1 and #2
4 Disallow Table #3
5 Disallow Table #1 and #3
6 Disallow Table #2 and #3
7 All three Disallow tables
4. Pause for the confi rmation tone.
Hang up or continue with programming.
Password To Override Call Barring
This feature gives you the fl exibility to allow extensions to override call barring (toll restrictions)
for a single phone call. To override Call Barring, the user must be provided with a 6-digit
password. This feature would most likely be used if a manager needs to make restricted calls from
any telephone in the system. It is also possible to restrict all extensions and this requires password
to be entered whenever a toll call is to be made.
To set the override Call Barring password:
1. In the programming mode, enter “763”.
2. Enter a 6-digit password. Pause for confi rmation tone.
3. Hang up or continue with programming.
To use this password, from any extension dial ‘40’, followed by the 6-
digit password entered in this command. A confi rmation tone will be given
if the password is entered correctly. The extension can continue making
unrestricted calls until it goes on hook for at least 2 seconds.
763
“Password”
Call Baring (Toll Restriction)
Chapter 3 - Functions Of IPS System