Installation guide

76
Sample Disallow Table
Slot Prefi x or Number
to Disallow
0 1
1 011
2 empty
3 empty
4 empty
5 empty
6 empty
7 empty
8 empty
9 empty
Sample Allow Table
Slot Prefi x or Number
to Disallow
0 1800
1 empty
2 empty
3 empty
4 empty
5 empty
6 empty
7 empty
8 empty
9 empty
Assigning Extensions To Tables
Once you have generated your Call Barring Table(s), you need to assign each extension to a
table. This is the step that bars specifi c extensions from calling the numbers on the table(s). Any
extension can be assigned to one or more tables. Extensions you do not wish to bar can be left
unassigned.
1. In the programming mode, enter “726”. Then enter the 2-digit extension
number (“00” to “15”)
2. Assign the Allow Table(s) to this extension. Enter the 1-digit code from
the table:
Code Table Assigned
0 None
1 Allow Table #1
2 Allow Table #2
3 Allow Table #1 and #2
4 Allow Table #3
5 Allow Table #1 and #3
6 Allow Table #2 and #3
7 All three Allow tables
726
Call Baring (Toll Restriction)
Chapter 3 - Functions Of IPS System