Installation guide

60
7834
To enable DOSA:
In the programming mode, enter “7834”.
Pause for confi rmation tone.
To disable DOSA:
In the programming mode, enter “7835”.
Pause for confi rmation tone.
Enable Direct Outward Station Access (DOSA)
The DOSA function must be enabled by the System Manager to allow an incoming caller to enter
a password and be connected to a different CO line to make an outgoing call.
Entering The DOSA Password
The DOSA password must be specifi ed using this command.
Enter password:
1. In the programming mode, enter “764”.
2. Enter a 6-digit password.
Pause for confi rmation tone.
7835
764
“Password”
Direct Outward Station Access (DOSA)
Chapter 3 - Functions Of IPS System