Installation guide

42
Private Incoming Lines
You may wish to confi gure one or more of the outside lines to operate as a Private Incoming Line.
This would allow an incoming call to ring at an extension other than the Operator. Outside lines 2,
3, and 4 may be defi ned as Private Incoming Lines. As such you can defi ne the list of extensions
which the IPS will search when an incoming call is detected on that line. Only one extension will
ring. This is different from outside lines defi ned as Standard Incoming Lines where more than one
extension can ring at the same time.
Entering The Private Incoming List(s)
1. In the programming mode, enter the code for the desired Private
Incoming List.
731 Outside Line 2, Day Mode List
732 Outside Line 3, Day Mode List
733 Outside Line 4, Day Mode List
791 Outside Line 2, Night Mode List
792 Outside Line 3, Night Mode List
793 Outside Line 4, Night Mode List
2. Enter 2-digit extension numbers (“00” to “15”) assigned to the Private
Incoming List.
Enter all of the extension numbers in succession. You can assign up
to 16 extensions. Be sure to enter the extensions in the order you want
them to be searched.
3. Hang up.
Hanging up is necessary for the assignments to register.
Central O ce Lines- Incoming Calls
Chapter 3 - Functions Of IPS System