Installation guide

40
The Standard Incoming List – Which Extension Is The Operator
The fi rst (non-Rollover) extension in the Standard Incoming List is defi ned to be the Operator.
This means that if your Standard Incoming Line List directs incoming calls to an Auto-Attendant
/ Voice Mail, the Operator will be defi ned as the next extension in the list after the Voice Mail
extensions (because your Voice Mail extensions would be defi ned as Rollover Extensions). Since
there is a separate list for Day and Night operation, a different Operator extension can be defi ned
for each mode.
Entering The Standard Incoming List
730 or 790
1. In the programming mode, enter “730” for the Day mode list or enter
“790” for the Night mode list.
2. Enter 2-digit extension numbers (“00” to “15”) assigned to the Standard
Incoming List.
Enter all of the extension numbers in succession. You can assign up
to 16 extensions. Be sure to enter the extensions in the order you want
them to be searched.
3. Hang up.
Hanging up is necessary for the assignments to register.
Central O ce Lines- Incoming Calls
Chapter 3 - Functions Of IPS System