Installation guide

111
Retrieve A Call Placed On Hold By Another Extension
48
Lift your handset and dial “48” to be connected to the outside call.
Retrieve A Call Placed On Hold If Other Extensions Have Multiple Calls On Hold
48
1. After dialing “48”, you will hear a triple-beep.
2. Press the digit that represents the order in which the incoming or
outgoing call accessed the system.
“1” = Least time in the system.
“2” = ↓
“3” = ↓
“4” = Longest time in the system
This order is independent when the call was put on hold.
Call Holding - Outside Line
Chapter 4 - IPS System Used With Ordinary Telephones