Installation guide

100
On Hook Time
This defi nes how long the switch-hook button must be depressed for the system to interpret the
signal as a “hang up” instead of a switch-hook.
14. Enter the “on hook time” code:
0 192 milliseconds
1 288 milliseconds
2 384 milliseconds
3 480 milliseconds
4 576 milliseconds
5 672 milliseconds
6 768 milliseconds
* 7 864 milliseconds
8 960 milliseconds
9 1056 milliseconds
Speed Dialing Delay Time
The IPS will pause for this amount of time after connecting to an outside line to dial a speed dial
number or to redial the last number before the fi rst digit is dialed.
15. Enter the “speed dialing and redialing delay time” code:
0 0.75 seconds
1 1.5 seconds
* 2 2.25 seconds
3 3.0 seconds
4 3.75 seconds
5 4.5 seconds
6 5.25 seconds
7 6.0 seconds
8 6.75 seconds
9 7.5 seconds
Chapter 3 - Functions Of IPS System
System Timing Parameters