User Manual

INS137
2005-UP S197 MUSTANG
STRUT TOWER BRACE
Tools required; 3/8” ratchet, 13mm socket. 4mm & 5mm Allen wrenches.
STEP 1
Attach the logo plate to the cross brace using the supplied nuts and bolts.
STEP 2
Remove the 4 nuts from the top of both strut towers.
STEP 3
Set the BBK polished strut mounts onto the strut towers over the studs.
STEP 4
Use the original nuts to secure the polished strut mounts. Torque to 26 ft-lbs.
STEP 5
Place the cross brace over the polished strut mounts and secure it to the polished
strut mounts using the supplied Allen bolts.
STEP 6
Once the cross brace is attached to the brackets, attach the cover plates to the
polished strut mounts with the supplied Allen bolts.
1. 3.
5. 6.