User Manual

INS139
STEP 3
Remove front and rear 18mm control arm mounting bolts and remove
control arm from the car.
STEP 4
Install new lower arm with stock bolts. Tighten bolts to 129ft-lbs.
STEP 5
Loop e-brake cable under arm and reconnect it to the caliper
actuating arm.
STEP 6
Reinstall cable retaining clip.
STEP 7
Repeat for opposite side.
NOTE Apply the parking brake firmly before lowering the car from the
jack stands!
Release seat bottom Remove fron t bolt
Remove brake cable clip Disconnect cable from caliper
Pull cable through control arm