Manual

2010-2013 Ford F-150 Raptor SVT 6.2L V8

Cold Air Induction Kit

Part # 1831

INS-184

STEP 4

STEP 5

STEP 6

• Install the supplied rubber grommet and straight

fitting into the BBK Cold Air Tube.

• Unclip the three clips at the air box and remove

the entire system out of the vehicle.

NOTE!!! The rubber coupler also needs to be

removed from the throttle body.

• Remove the MAF Sensor from the stock intake

system using a T-20 Torx and install it into the

BBK Cold Air Tube using the supplied

hardware. NOTE!!! The Air Flow of the sensor

needs to be going towards the throttle body,

the sensor should only fit one way because

of the stagger in the hole pattern.