Owners manual

Part # 1513,1553- 1986-93 Ford V8 5.0L EFI Engines

Part # 1528,1554- 1994-95 Ford Mustang GT

Power Plus Series

Underdrive Pulley Kit

INS-008

Follow these instructions carefully to ensure correct fitment and operation.

Special Tools

Required:

•

No special tools

required

Install Time:

Approximately

1 Hour 30 Mins

Difficulty:

3 out of 5

STEP 1

STEP 3

•

Disconnect the negative battery terminal.

STEP 4

STEP 2

• Remove the bolts from the water pump and

crank pulleys the rest of the way and remove

the stock pulleys.

• Loosen the bolts on the water pump and crank

pulleys.

• Remove the serpentine belt by shifting the

adjuster to the passenger side.

• Install the BBK underdrive pulleys to the water

pump and vibration dampener using the stock

bolts.

STEP 5

PAGE 1
Part # 1513,1553- 1986-93 Ford V8 5.0L EFI Engines Part # 1528,1554- 1994-95 Ford Mustang GT Power Plus Series Underdrive Pulley Kit Special Tools Required: • No special tools required Install Time: Approximately 1 Hour 30 Mins Difficulty: 3 out of 5 Follow these instructions carefully to ensure correct fitment and operation. STEP 1 • STEP 5 Disconnect the negative battery terminal. STEP 2 • Loosen the bolts on the water pump and crank pulleys.
PAGE 2
Part # 1513,1553- 1986-93 Ford V8 5.0L EFI Engines Part # 1528,1554- 1994-95 Ford Mustang GT Power Plus Series Underdrive Pulley Kit STEP 6 STEP 8 • Inspect the serpentine belt for wear. Unless recently replaced, BBK highly recommends the purchase of a new serpentine belt to compliment the new pulleys, and install. STEP 9 • With the serpentine belt on, tighten the water pump and crank pulley bolts.