Manual

BBK Phenolic Spacer Kits

Part # 1506,1508,1520,1530,1549

INS-003

Follow these instructions carefully to ensure correct fitment and operation.

Special Tools

Required:

•

No special tools

required

Install Time:

Approximately

1 Hour

Difficulty:

3 out of 5

STEP 1

STEP 6

• Disconnect the throttle duct hose from the

throttle body.

STEP 3

STEP 2

• Disconnect the wire connectors from the upper

manifold and also the vacuum lines on the

underside of the upper intake.

• Disconnect the throttle linkage from the throttle

body and also the kick-down linkage if

applicable.

• Next install the phenolic spacer by placing a

new gasket on both sides of the spacer.

STEP 4

STEP 7

• Remove the cover plate from the upper intake if

equipped. Next remove the six bolts from the

upper intake manifold.

STEP 5

STEP 8

• Lift off the upper intake and discard the gasket,

also making sure both surfaces are free from

dirt and grease.

• Next simply reverse the previous steps.

• Use the new bolts provided and tighten in a

criss-cross pattern beginning with the center

bolts.