Service manual

– 20 –
KDF-E42/50A11E
RM-ED002
44
GB
Specifications Display Unit Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
KDF-E50A11E: 50 inches KDF-E42A11E: 42 inches
Display Resolution (horizontal x vertical):
1280 dots xlines
Power Consumption:
175 W
Standby Power Consumption:
0,8 W
Dimensions (w × h × d):
KDF-E50A11E:
Approx. 825 x 1180 x 395 mm
KDF-E42A11E:
Approx. 720 x 1000 x 350 mm
Weight:
KDF-E50A11E:
Approx. 29.6 kg
KDF-E42A11E:
Approx. 25.1 kg
Panel System LCD (Liquid Crystal Display) Panel TV System Analogue: Depending on your country/region selection:
B/G/H, D/K, L, I.
Digital: DVB-T. Colour/Video System Analogue: PAL, SECAM.
NTSC 3.58, 4.43 (only Video In)
Digital: MPEG-2 MP@ML Aerial 75 ohm external terminal for VHF/UHF Channel Coverage Analogue: VHF: E2–E12
UHF: E21–E69 CATV: S1–S20 HYPER: S21–S41 D/K: R1–R12, R21–R69 L: F2–F10, B–Q, F21–F69 I: UHF B21–B69
Digital: VHF/UHF
Terminals
AV1: / 1
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, and TV audio/video output.
AV2: / 2 (SMARTLINK)
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, selectable audio/video output, and SmartLink interface
AV3: 3
Y:1 Vp-p, 75 ohms, 0.3V negative sync P
B
:0.7 Vp-p, 75 ohms
P
R
:0.7 Vp-p, 75 ohms
3 Audio input (phono jacks)
500 mVrms
Impedance: 47 kilo ohms
AV4: 4S video input (4-pin mini DIN)
4 Video input (phono jack) 4 Audio input (phono jacks)
AV5: 5
PC Input (15 Dsub) (see page 36) G: 0.7 Vp-p, 75 ohms, non Sync on Green B: 0.7 Vp-p, 75 ohms, non Sync on Green R: 0.7 Vp-p, 75 ohms, non Sync on Green HD: 1-5 Vp-p VD: 1-5 Vp-p
PC audio input: minijack.
Audio output (Left/Right) (phono jacks)
AV6: 6
HDMI: Video: 480i, 576i, 480p, 576p, 720p, 1080i
Audio: Two channel linear PCM 32, 44.1 and
48 kHz, 16, 20 and 24 bits.
AUDIO:500 mVrms (100% modulation)
Impedance: 47 kilohms
i Headphones jack
CAM (Conditional Access Module) slot
MODEM Modem jack (Not supported on this TV)
Sound Output 10 W +10 W (RMS) Supplied Accessories
Remote RM-ED002 (1) Size AA batteries (R6 type) (2) Coaxial cable (1)
Additional Information
45
GB
Additional Information
Optional Accessories
TV stand SU-RG11S (KDF-E42A11E) TV stand SU-RG11M (KDF-E50A11E) Lamp: XL-2400
Design and specifications are subject to change without notice. PC Input Specifications PC Input Timing Input signal frequency: Horizontal: 31,4 - 48,4 KHz. Vertical: 59 - 61 Hz. Maximum Resolution: 1024 dots x -768 lines. Preset mode timing table for PC Nº Resolution Graphic mode Horizontal Vertical
(dots x lines) frequency frequency
(kHz) (Hz)
1 640 x 480 VESA 60 31.469 59.940 2 800 x 600 VESA 60 37.879 60.317 3 1024 x 768 VESA 60 48.363 60.004
This TV does not support Sync on Green or Composite Sync. If a signal other than in the above chart is input, it may not be displayed properly or may not be displayed as you set. Using the Vertical frequency (Hz) of the personal computer at 60 is recommended.