Service manual

– 16 –
KDF-E42/50A11E
RM-ED002
36
GB
Option Description
PIN Code
Sets a PIN code for the first time, or to change your PIN code. 1 Enter a PIN as follows:
If you have previously set a PIN
Press the number buttons to enter your existing PIN. If you have not set a PIN: Press the number buttons to enter the factory setting PIN of 9999.
2 Press the number buttons to enter the new PIN code. 3 When requested, press the number buttons to enter
the new PIN again for confirmation.
A message appears to inform you that the new PIN has been accepted.
4 Press <. Tip PIN code 9999 is always accepted.
Technical Set-up
Displays the Technical Set-up menu. Do the following options. 1 Press m/M to select the desired option, then press
OK.
Auto Service Update: Enables the TV to detect and store new
digital services as they become available.
Software download: Enables the TV to automatically receive
software updates, free through your existing aerial (when issued). Sony recommends that this option is set to “On” at all times. If you do not want your software to be updated, set this option to “Off”.
System Information: Displays the current software version and
the signal level. Instead of step 2, Press <.
2 Press m/M to select the “On”, then press OK.
CA Module Set-up
This option will allow you to access a Pay Per View service once you obtain a Conditional Access Module (CAM) and a view card. See page 36 for the location of the (PCMCIA) socket.
37
GB
Using Optional Equipment
R/D/ D/D
MONO L/G/ S/I
Connecting optional equipment
Using Optional Equipment
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied. Connecting to the side of the TV To connect Do this S VHS/Hi 8/DVC camcorder
A
Connect to the S video socket
4 or the video socket 4,
and the audio sockets 4. To avoid picture noise, do not connect the camcorder to the video socket
4 and the S video socket
4 at the same time. If you
connect mono equipment, connect to the L/G/S/I sockets 4, and set “Dual Sound” to “A” (page 24).
Personal Computer
B
Connect to the PC Input socket
5 and the audio socket 5.
Headphones
S VHS/Hi8/DVC camcorder
Continued
To connect Do this
Headphones
C
Connect to the i socket to listen to sound from the TV on headphones.
Note: It is recommended to use a PC cable with ferrites.
Personal Computer