Service manual

ManualsBrandsBBE Sound ManualsAudio MixerAudio Restoration System BBE ARS

– 13 –

KDF-E42/50A11E

RM-ED002

Tunes in all the available analogue channels.

Usually you do not need to do this operation because the channels are already tuned when

the TV was first installed (page 13). However, this option allows you to repeat the process

(e.g., to retune the TV after moving house, or to search for a new channels that have been

launched by broadcasters).

1 Press OK to select “Auto Tuning”.

2 Follow step 1 of “Auto-tuning the TV” (page 13).

When all available analogue channels have been tuned, the TV returns to normal

operation.

Changes the order in which the analogue channels are stored on the TV.

1 Press OK to select “Programme Sorting”.

2 Press M/m to select the channel you want to move to a new position,

then press OK.

3 Press M/m to select the new position for your channel, then press OK.

Repeat the procedure in steps 2 and 3 to move other channels if required.

Auto Tuning (Analogue mode only)

Programme Sorting (Analogue mode only)

Using the Menu

Assigns a channel name of your choice up to five letters or numbers. The name will be

displayed briefly on the screen when the channel is selected. (Names for channels are usually

taken automatically from Text (if available).)

1 Press OK to select “Programme Labels”.

2 Press M/m to select the channel you want to name, then press OK.

3 Press M/m/</, to select the desired letter or number (“s” for a blank

space), then press OK.

If you input a wrong character

Press M/m/</, to select %/5 and press OK repeatedly until the wrong character is

selected. Then, press M/m/</, to select the correct character and press OK.

4 Repeat the procedure in step 3 until the name is complete.

5 Press M/m/</, to select “End,” then press OK.

Do the following options.

1 Press OK to select “AV Preset”.

2 Press M/m to select the desired input source, then press OK.

3 Press OK. Then press M/m to select the desired option below, then

press OK.

Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”/”ATT”, press PROG +/-

to select the programme number with the channel. You cannot select a programme number

that is set to skip (page 33).

1 Press OK to select “Manual Programme Preset”.

2 Press M/m to select one of the following options, then press OK.

Programme Labels (Analogue mode only)

AV Preset

Option Description

Label Assigns a name to any equipment connected to the side and rear

sockets. The name will be displayed briefly on the screen when the

equipment is selected.

Press M/m to select one of the following, then press OK.

AV1 (or AV2/AV3/AV4/PC/HDMI) VIDEO/DVD/CABLE/

GAME/CAM/SAT: Uses one of these preset labels.

Edit: Creates your own label. Follow steps 3 through 5 of

Programme Labels (page 31).

Skip:

Skips an input source that is not connected to any equipment when

you press M/m to select the input source.

After selecting this option, press OK.

Sound Offset:

Sets an independent volume level to each equipment connected to

the TV.

Press

to select “Sound Offset”, then press OK. Press M/m to

select the desired volume level.

Manual Programme Preset (Analogue mode only)

Continued