Service manual

ManualsBrandsBBE Sound ManualsAudio MixerAudio Restoration System BBE ARS

– 11 –

KDF-E42/50A11E

RM-ED002

Selects the sound from the speaker for a stereo or bilingual broadcast.

1 Press OK to select “Dual Sound”.

2 Press m/M to select one of the following, then press OK.

Stereo/Mono: For a stereo broadcast.

A/B/Mono: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2,

or “Mono” for a mono channel, if available.

Tip

If you select other equipment connected to the TV, set “Dual Sound” to “Stereo,” “A” or “B.”

Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be

louder than programmes).

1 Press OK to select “Auto Volume”.

2 Press m/M to select “On,” then press OK.

Tip

If you set “Sound Effect” to “Dolby Virtual”, “Auto Volume” will automatically be switched to

“Off”.

Dual Sound

Auto Volume

Features menu

Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If

you connect a VCR to the / 2 socket, you can then record from the equipment

connected to other sockets of the TV.

1 Press OK to select “AV2 Output”.

2 Press m/M to select one of the following, then press OK.

D-TV: Outputs a digital broadcast.

A-TV: Outputs an analogue broadcast.

AV1: Outputs signals from equipment connected to the / 1 socket.

AV4: Outputs signals from equipment connected to the 4/ 4 socket.

Auto: Outputs whatever is being viewed on the screen.

Turns off the TV speakers e.g. to listen to the sound through external audio equipment

connected to the TV.

1 Press OK to select “TV Speakers”.

2 Press m/M to select one of the following, then press OK.

On: the sound is output from the TV speakers.

One Time Off: the TV speakers are temporarily turned off allowing you to listen to the

sound from external audio equipment.

Tip

The “TV speakers” option automatically returns to “On” when the TV set is switched off.

Permanent Off: the TV speakers are permanently turned off allowing you to listen to

the sound from external audio equipment.

Tip

To turn on the TV speakers again, change to on.

You can select the options listed below on the

Features menu. To select options, see “Navigating

through menus” (page 19).

AV2 Output

TV Speakers

Select: Set: Back:

End:

AV2 Output

TV Speakers

PC Adjustment

Features