Specifications
38 www.clarion.com
www.clarion.com 39
PFW1051
25 CM (10″ ) SINGLE 4-OHM VOICE
COIL SLIM-LINE SUBWOOFER
SRM3093HX
30 CM (12″) SINGLE 4-OHM VOICE
COIL HIGH-CLASS SUBWOOFER
SW3013B
30 CM (12″) SUBWOOFER WITH BASS-REFLEX BOX
SW2513B
25 CM (10″) SUBWOOFER WITH BASS-REFLEX BOX
• 30 cm titanium metallised MIPP cone woofer with rubber surround • Double-stacked
powerful strontium magnets • Seamless parabolic cone structure for dynamic bass
response • Aluminium die-cast frame and cooling spacer for high power handling • OFC
wiring • Single 4-ohm heat resistant voice coil • Rear-vented pole piece • Music peak
power: 1,200 W • Continuous power: 300 W • Frequency response: 15 ~ 1,500 Hz
• Efficiency: 93 dB / W / m • Fs: 29 Hz • Qts: 0.55 • Vas: 135.6 litres
• Dual voice coil • 120 W high power amplifier with Low Pass Filter • Maxx Bass circuit for
virtual bass enhancer • 17 cm (6-3/4″) counter drive woofer with dual-neodymium magnet
• Air compression structure with aluminium die-cast enclosure • Remote control for gain
control / Low Pass Filter (selectable 50 / 75 / 100 / 120 Hz) / phase select • Blue LED
power indicator • RCA line level input/speaker level input • Music peak power: 120 W
• Continuous power: 60 W • Frequency response: 30 ~ 200 Hz
*“Maxx Bass” is a patent of KS-Wares.“Maxx Bass” is a registered trademark of KS-Wares.
• Dual voice coil woofer with strontium magnet • 120 W high power amplifier with Low
Pass Filter • Air compression structure for dynamic bass response • Subwoofer level
control for gain control / Low Pass Filter (55 ~ 130 Hz) / phase select • Leather finished
MDF enclosure • RCA line level input/speaker level input • Music peak power: 120 W
• Continuous power: 60 W • Frequency response: 20 ~ 200 Hz
SRV313
SLIM DESIGN 17 CM (6-3/4″)
COUNTER DRIVE ACTIVE
SUBWOOFER
SRV202
20 CM (8″) ACTIVE
SUBWOOFER
SW2512
25 CM (10″) SINGLE 4-OHM VOICE COIL
SUBWOOFER
Clarion offers subwoofers for those who require great bass and won’t settle for second best. Features such as a durable die-
cast aluminium frame with powerful damping and dual strontium ferrite magnet motor assembly, provide an unprecedented
sense of bass. Real world tested Spider Exhaust Technology provides advanced thermal cooling to ensure extended woofer
life, and helps maintain peak performance at all times.
Stellar bass performance
● Dual strontium ferrite magnets
Dual strontium ferrite magnets are used in
the voice coil to maximise power, while high
temperature voice coil formers take the forefront
in the battle against heat building up in the voice
coil.
● S.E.T. (Spider Exhaust Technology)
cooling
Heat is the number one enemy of a subwoofer.
Clarion’s Spider Exhaust Technology allows hot
air to escape from the outside of the voice coil
assembly. And vented pole pieces allow airflow.
● Die-cast aluminium frame (PFW1051)
An aluminium die-cast frame is employed for its
toughness and the vibration damping properties
it provides. Aluminium suppresses noise from
resonance and energy loss to achieve linear
movement for cones and voice coils.
● Hyper-extended vented pole pieces
Hyper-extended vented pole pieces allow
airflow through the centre of the drive structure
to further improve power handling.
● Dual gold-plated terminal blocks
The terminal blocks are gold-plated to ensure
minimum contact loss and maximum signal
purity. This is a must for systems where high
quality audio reproduction is required, and it
shows that you’re serious about your sound.
● 4-ohm voice coil
The voice coil is rated at 4 ohms, allowing the
subwoofer to be integrated into most car audio
systems. You can therefore enjoy the benefits of
powerful bass reproduction, without having to
invest in an 8-ohm amplifier.
● Easy mounting bass-reflex design
(SW3013B / SW2513B)
The powerful bass performance of the speaker driver itself is
augmented by the bass-reflex system’s resonance box and
duct design. Count on earth-shaking bass performance from
these subwoofer units, while enjoying the relatively easy and
flexible installation possibilities they offer.
SUBWOOFER TECHNOLOGY
(PFW1051 / SW3012 / SW2512 / SW3013B / SW2513B)
FEATURES & SPECIFICATIONS
Subwoofer Subwoofer
Bass-Reflex
Subwoofer
Bass-Reflex
Subwoofer
Reproduction system
311 263 311 263 Speaker size (mm)
Single Single Single Single 4-ohm voice coil
●●●●
Polypropylene electronic spun aluminium
dust cap
●●●●
Fibreglass /
paper cone design
●●●●
Nitrile butadiene rubber high
excursion surround
●●●●Dual strontium ferrite magnets
●●●●Hyper-extended vented pole piece
●●●●
Spider Exhaust Technology
(S.E.T.) cooling
●●●●Dual gold-plated terminal blocks
●●●●
Linear cotton spider with integrated tinsel
leads
●●●●
Custom stamped steel powder coated
chassis
●●●●Impedance: 3.6 Ω ± 5 %
700 600 700 600 Music peak power (W)
350 300 350 300 Continuous power (W)
30 ~ 1 k 32 ~ 1 k 30 ~ 1 k 32 ~ 1 k Frequency response (Hz)
89 87 89 87 Efficiency (dB / W / m)
4.25 4.1 — — Total weight (kg)
——
480 × 385
× 415
435 × 325
× 365
Box dimensions (W × H × D) (mm)
SW3012
SW2512
SW3013B
SW2513B
SW3012
30 CM (12″) SINGLE 4-OHM VOICE COIL
SUBWOOFER
Titanium metallised
MIPP cone
Gold-plated
push terminals
Double-stacked
powerful strontium
magnet
Seamless parabolic
cone structure for
dynamic bass response
Rear-vented
pole piece
Aluminium
die-cast
frame
Butyl rubber
surround
(
SRM3093HX)
● Air compression
The SRV313 and the SRV202 employ
an air compression structure where the
acoustic pressure is compressed within
the cabinet and released from the rear
duct. This makes it possible to reproduce
dynamic deep bass with impressive
sharpness. (
SRV313 / SRV202)
Stick wired
remote control
Cutoff frequency
Gain control
Phase switch
• 76 mm mounting depth • 600 watts of maximum music power • 300 watts RMS • Single
4-ohm heat resistant voice coil • Polypropylene electrolytic spun aluminum coated dust
cap design • Kevlar/paper composite cone design • Co-polymer composite high excursion
surround • Dual strontium ferrite magnet motor assembly • Hyper-extended vented pole
piece • Dual gold-plated block terminals • Linear poly-cotton spider with integrated tinsel
leads • S.E.T. (Spider Exhaust Technology) cooling • Custom designed die-cast aluminium
frame • Hidden screw mounting gasket • Music peak power: 600 W
• Continuous power: 300 W
SUBWOOFERSUBWOOFER
Double-stacked powerful strontium magnets
30 cm TM-MIPP cone with rubber surround
Dual strontium ferrite magnets
S.E.T. (Spider Exhaust Technology)
cooling
SRV SERIES
Dual voice coil counter drive woofer with
dual-neodymium magnet
120 W high power amplifi er with
low pass fi lter
Dual voice coil woofer with powerful
strontium magnet
120 W high power amplifi er with
low pass fi lter
SW SERIES
Dual strontium ferrite magnets
S.E.T. (Spider Exhaust Technology)
cooling
SUBWOOFERS
SUBWOOFERS