User`s manual

4. Lay the Frame Pad (6) on the frame. Adjust the

position of the Frame Pad so the notches are

aligned with the Legs (6) as shown. Be sure

6 Enclosure Frame Opening are t to the

Enclosure Socket position.

Do not use the trampoline without the Frame

Pad (6), which is designed to reduce the likeli-

hood of injury to the user from coming in con-

tact with the trampoline frame. If you do not

have a Frame Pad, contact your dealer to

obtain one. Properly install the Frame Pad

before using the trampoline.

Enclosure Frame Opening

Notches

Thread one end of Elastic Tie-Down, then tie a knot

on V-Ring.

Repeat this step with the remaining straps which at

middle position of each pad section (not shown).

Elastic Tie-Down

Spring

V-Ring

Look under the trampoline and locate the

straps near the edge of bed.

6. See the inset drawing.

Elastic Tie-Down