Mobile Audio CS Amplifier Installation Manual

SPECIFICATIONS
CSA50.2 CSA50.4 CSA200.3
Size (L x W x H) 7
Max Power 200W 400W 400W
Output Power @ 14.4 VDC :
4 ohm 50W x 2 50W x 4 50W x 2 + 1 x 100W
2 ohm 75W x 2 75W x 4 75W x 2 + 1 x 150W
Bridged 4ohm 150W x 1 150W x 2 N/A
Frequency Response + - 1dB 20Hz-30KHz 20Hz-30KHz 20Hz-30KHz
S/N Ratio (A-weight) >90dB >90dB >90dB
THD with 80k filter .30% .30% .30%
Low Input Level 200mV-6V 200mV-4V 200mV-6V
Battery Voltage Range 10.5VDC-15.0VDC 10.5VDC-15.0VDC 10.5VDC-15.0VDC
Crossover S/W for 1+2 channel HP/FULL/LP HP/FULL/LP HP/FULL/LP
Crossover Frequency 200Hz 200Hz 200Hz
Crossover Slope 6dB/Oct 6dB/Oct 6dB/Oct
Unbalanced Input (RCA Jack) Yes Yes Yes
Amplifier Fuse & Holder 1 x 20A 2 x 20A 2 x 25A
Max Power 300W 500W
Output Power @ 14.4 VDC :
4 ohm 100W x 1 250W x 1
2 ohm 150W x 1 375W x 1
Bridged 4ohm N/A N/A
Frequency Response + - 1dB 20Hz- 130Hz 20Hz-130Hz
S/N Ratio (A-weight) >90dB >90dB
THD with 80k filter .15% .03%
Low Input Level 200mV-4V 200mV-6V
Battery Voltage Range 10.5VDC-15.0VDC 10.5VDC-15.0VDC
Crossover Type LP LP
Variable Low Pass Range 40Hz- 130Hz 40Hz-130Hz
Crossover Slope 12dB/Oct 12dB/Oct
Bass EQ at FULL/LP *0-12dB @ 45Hz *0-12dB @ 45Hz
Unbalanced Input (RCA Jack) Yes Yes
Jack for Remote Control N/A Yes
Amplifier Fuse & Holder 1 x 25A 2 x 25A
Due to continuing product improvement, specifications subject to change without notice.
15 1 15 1 15
” x 10 / ” x 2 / ” 12 / ” x 10 / ” x 2 / ” 12 / ” x 10 / ” x 2 / ”
48 2 48 2 48
CSA150.1 CSA300.1
115315
Size (L x W x H) 8 / ” x 10 / ” x 2 / ” 9 / ” x 10 / ” x 2 / ”
248448
* Low-pass Only
16