Owner's Manual

~
SAS
For more information in the USA:
Southern Audio Services, INC
14763 Florida Blvd,
Baton Rouge, LA 70819
1-aoo-843-8823 Dome
www.bazooka.com Button
[e-mail]
Back/ Select
Play/ Pause
1. Long press the Power button to turn the Party Bar
ON/OFF.
2. Click press the Power button to turn the LED Lights
ON/OFF.
3. Dome button turns the LEDs ON and sets all LEDs
to WHITE.
4. ACC button turns ON/OFF the accessory 12v pig
tail for
an external LED light bar or other accessory.
Pair Dashboard Controller to Party Bar
odel: G2
0
Power Button (Music & LED)
Accessory Button
Volume Control
Forward/ Select
Mode (Change Music Mode)
5. Press the Mode button to toggle between
Bluetooth/AJx/0561:istening modes.
6. Press '>ff to.Pa\tJt.. · .. · · •
7. Press Vol+/- to 'rafs'•f'"·: · · e volume of the
Party Bar.
8. Press I<< and >>I buttons to track
forward/reverse on
songs or to change the LED
sequence when in LED mode.
9. Multi-pair up to 6 Dashboard Controllers to one G2
Party Bar.
1. Disconnect the power wire from the Party Bar, then press the ACC and the Pause/Play buttons at the same
time to put the Dashboard Controller into matching mode.
2. The LCD display will show "CONNECT" indicating the remote controller is in matching mode.
3. Connect the Party Bar back to power within 45 secs, (ATTN! Plug the 12 V power wire into the speaker, do not
just
press the ON/OFF button) the display will show "MATCH OK" within 1 sec. This means your Dashboard
Controller is successfully paired with the Party Bar.
Unl~iJSh th~ Sound iJnd i111.1m1nilf~ Ynur : lldv~ntur~
an Land or Over Water, Take the Party to the NEXT LEVEL in SOUND and LIGHTS
www .bazooka.com