Owner`s manual

2
A Telplex pair may be used in a "point-to-point" application where up
to two, four, or eight separate lines of data may be multiplexed and
demultiplexed simultaneously between two sites as shown in Figure 1 .
The Telplex TX104
and TX108 multiplex
four or eight individual
communications lines
into a single
composite channel.
These statistical
multiplexers can be
used with existing
modems, short haul
modems, or hard-
wired back-to-back to
suit your specific
requirements
Figure 1
In this example, Port 1 of Unit 1 communicates with Port 1 of Unit 2,
Port 2 of Unit 1 communicates with Port 2 of Unit 2 and so on.
NOTE: Standard units will support point-to-point applications only.
A multi-drop application involving multiple composite ports will connect
several units to a TX60 or TX28 in a "star" configuration. See Figure
2 on the following page.